homeRmade BODIES F/S....

[homer]

I finally got my materials in place and everything is set to go. I will be pulling these myself as discussed here and here

These are several new bodies that will fit the MRS4 and the M18.

Please send your orders here, with quantity and body choice(s) (A to G)
I will reply with instructions & total pricing, and questions you may have.

Price: Bodies (A to D)$14.50usd per body (rear wing included) plus shipping**
Bodies (E to G) $16.50 plus shipping**
NEW!! - Pre-Order - Body H $16.50 plus shipping**

Body I (The Pug - Rally 140mmWB) $16.50 plus shipping**

Body M (Mini Coop 150mmWB) $16.50 plus shipping**

**shipping from Canada (for now).

**(USA 48 and including Hawaii) shipping & handling - by air - $6usd - insurance incl.
**Canada shipping & handling by CP parcel post - $10.00usd - optional delivery confirmation & Insurance = $1.00usd extra. sorry guys, CP is always more $$$ when shipping within Canada

**(Europe/ UK) shipping & handling - by air - $9.00usd -insurance included.

Delivery times are 1-2 weeks or shorter (depending on the mood of CP)

I will combine shipping on additional bodies to save you on shipping & handling charges. email me for pricing.
I accept PP or MO (If paying by MO, MO must clear my bank before shipping out.)

Disclaimer & Policy: All bodies are sold "as is" and have been made to the best of my abilities. All bodies are personally pulled, cut and inspected by myself. Absolutely no refunds or exchanges. I assume no responsibility for your paid goods once the pkg is in the hands of the postoffice. That being said, I have never lost any pkg of goods Ive shipped out. I have 100% +ve feedback here & on one18th and I pride myself in the goods Ive sold in past.
If you're not in agreement with the above, then please don't buy.
Thanks.

homer

[quietfly]

you've got Mail......


Sneaky trying to post this at 4am....


Lucky for me I was up surfing... er i mean working..


-Chris

[4_cell_racer]

Hi, How would the wing that comes with the shell be mounted? would I/we have to use the MRS4 wing mounts?

Cheers
Lee

[damo]

lee if your thinking of getting one give me a shout ont he other board and we can combine shipping?

really like the look of the bmw shell...

homer if you are interested there is a uk forum in my sig...you might get a few more orders from over here if you stick a post on there...or just say and ill cut paste/link to the post etc for you...(sorry mondo if i wasnt sposed to say that)

[Ken Mifune]

Awesome job, Homer!

There are not many things more fun than funding a hobbie by contributing to the hobbie itself. Congrats.

Very low styling indeed. Can they sit even lower without creating holes for chassis/suspension clearance?
________
pot news

[homer]

Thanks, Ken.

All the bodies were designed to "sit" right on top of both the MRS4 and M18 w/o the body posts in place.
I had several criteria. in this order, when making these ones:

(1) to keep the CG low as possible.
(2) either no mods to the shell or very minimal. In the case of the LMR, which has a very "flat" design, it will sit flush onto the MRS4 front bumper post attachments and upper rear deck with or without body posts set to minimum height This depends of course, on ones electronics and layout.
For the M18, to get it at its absolute lowest setting, you'll need to open up a hole, at the front, where the top of the front shocks are. (see pic attached)
(3) wheels cutouts on the body need to be proportional and tight as possible (if required) to the top side of the quarter panel. (see pic attached)
(4) workable for both the 150 and 140mm wb micros.

[homer]

Originally posted by damo
lee if your thinking of getting one give me a shout ont he other board and we can combine shipping?

really like the look of the bmw shell...

homer if you are interested there is a uk forum in my sig...you might get a few more orders from over here if you stick a post on there...or just say and ill cut paste/link to the post etc for you...(sorry mondo if i wasnt sposed to say that)

damo, thanks. if you could do that for me, that would be awesome.

[homer]

Originally posted by 4_cell_racer
Hi, How would the wing that comes with the shell be mounted? would I/we have to use the MRS4 wing mounts?

Cheers
Lee

yes. you would use the MRS4 wing wounts. for "D", you can either use the wing mounts or Ive designed the wing so that you can cut it and CA it (in either the lowered or raised position).
I'll post a pic of it later today, when I get it done.

[RadiShack]

awesome homer ! i will be ordering too !

[acsubie]

homer, i saw in you other thread you might be interested in making wrx bodies that actually fit the M18? i think that would be killer and i'd def be down for that, maybe other would be intested also?

[homer]

Originally posted by acsubie
homer, i saw in you other thread you might be interested in making wrx bodies that actually fit the M18? i think that would be killer and i'd def be down for that, maybe other would be intested also?

I read about that problem...maybe it would be wise to contact RAD and ask them to modify/change their cast so it would accommodate the M18?? or has it been done already...

[homer]

Body "D" with wing installed in raised position.

[alfred]

very nice work indeed.......

[thumpin347]

are there cut lines in the body and lines for the wheel well?

[homer]

Originally posted by thumpin347
are there cut lines in the body and lines for the wheel well?

Hi thumpin347,

no cutlines for the weel wells. simply because:

(1) the M18 and MRS4 wb is slightly different,
(2) ride height due to various electronics under the lid,
(3) personal preference on ride height.

Its quite easy to mark and cut the wells once you have the body mount holes drilled.